Foam washing and disinfection equipment systems have become an integral part of modern professional cleaning systems. They ensure effective pollution removal and provide a high degree of sanitation. Let’s look at the basic steps for the operation and maintenance of Odyssey foam satellites.
Step 1. Preparing for work
Before starting to work with the foam satellite, it is necessary to pull out the required amount of hose before fixing the drum. Make sure that the hose is evenly distributed and has no bends or kinks.
Step 2. Surface treatment
To get started, install the flush nozzle (Blue) and turn the handle of the stationary foam satellite to the «flush» position. Treat the surfaces to be washed. This step helps to remove coarse dirt before applying foam.
Step 3. Applying foam
Change the nozzle to the foam nozzle (White) and turn the handle of the stationary foam satellite to the «foam» position. After the formation of a stable uniform foam, apply it to the surfaces to be sanitized and maintain the exposure time indicated on the chemical.
Step 4. Flushing the foam
Change the nozzle to flush (Blue) and turn the handle of the stationary foam satellite to the flush position. Thoroughly rinse the foam from the surfaces. This stage completes the process of removing dirt from the surface.
Step 5. Additional measures
If necessary, use brushes and/or repeat the procedure to eliminate stubborn dirt. This will ensure a deeper and more thorough cleaning.
Step 6. Winding the hose
To wind the hose onto the inertia drum, pull the hose up to the release of the locking mechanism and wind the hose evenly. This will ensure proper storage and increase the service life of the hose.
Important note!
It is forbidden to use the «Flush» mode without an appropriate nozzle. This is an important safety rule that helps to avoid damage to the equipment and ensures the effective functioning of the Odyssey foam satellite.
Following these steps will help you make the most of Odyssey and maintain a high standard of cleanliness in your work or home space.
In order to maximize the capabilities of your foam satellite and ensure its long service life, it is important to follow several key principles of use and care.
First of all, pay due attention to setting up your foam satellite. Read the operating instructions to properly connect and configure the equipment for specific tasks. Pressure adjustment, mixing of foam and water – all these parameters affect the efficiency and durability of the device.
Choosing the right detergent also plays an important role. Make sure that you use the products recommended by the manufacturer. This will help to avoid damage to the equipment and ensure maximum cleaning efficiency.
To extend the life of the foam satellite, perform regular maintenance. Clean the filters, check the condition of the hoses and nozzles. Carefully monitor the condition of the pump and other key elements. Regular cleaning and maintenance will help to avoid unpleasant surprises during operation.
If there are signs of wear or damage to the parts, immediately start replacing them. This applies to both the main components of the foam satellite and small parts. Replacing worn O-rings, filters and other parts will help prevent breakdowns and ensure stable operation of the equipment.
When the foam satellite is not in use, it is important to store it properly. Provide protection from adverse weather conditions, avoid overheating and store the equipment in a dry place. This will help prevent corrosion and other damage that may result from improper storage.
Odyssey Systems not only provides you with advanced technologies for effective cleaning, but also strives to support you at every stage of use.
Our company is always in touch with its customers. We appreciate your trust and are ready to provide professional advice on all issues related to the use of Odyssey foam washing and disinfection equipment systems. If you have any questions about setup, technical issues or maintenance, our experts are always ready to help.
Do not forget that the efficient use and regular maintenance of your foam satellite not only ensures excellent washing results, but also prolongs its service life. Together with Odyssey Systems, you get not only a product, but also a reliable partner in the care of your workspace.
We ourselves produce most of the items for the system: Pumping stations, foam stations, mobile carts, holders, mounting stands, etc.
We have registered our own trademark and always make sure that the client is satisfied and recommends us to specialists from other enterprises
The OdysseySystems company provides a full range of services in matters of cleanliness in food enterprises: from application processing to facility commissioning and personnel training. Our specialists will install the system in any region of the Russian Federation.
For enterprises that have water treatment systems installed that provide a working pressure of 20 bar, we can provide a test sample of a foam satellite for 30 days for operation at the enterprise.
The advance payment is 50% of the total contract amount. 30% is paid before shipping the goods to the customer. 20% is paid within 10 days after signing the equipment acceptance certificate
The OdysseySystems company provides a full range of services in matters of cleanliness in food enterprises: from application processing to facility commissioning and personnel training. Our specialists will install the system in any region of the Russian Federation.