The foam station is a convenient and effective device for thorough cleaning of food production facilities. To get high-quality foam, you need to take into account several important parameters, which we will consider below.
To form dense foam, a water pressure of at least 5 bar and an air flow of at least 150 l/min are required. If the water and air pressure are insufficient, the foam will be liquid and will not be able to effectively clean the surface. At the same time, too high a pressure can damage the surface, so it is important to select the optimal parameters for a specific washing task.
The quality of the foam also depends on the foaming detergent. When choosing a detergent, you should consider the type of surface to be cleaned and the degree of contamination. Some detergents foam well at low temperatures, others at high temperatures. It is important to choose a detergent that is suitable for the specific wash and provides high quality foam.
The optimal water temperature for washing is 30-50 degrees Celsius. At this temperature, the detergent dissolves better and a denser foam is formed. However, if the surface to be cleaned cannot withstand high temperatures, then a lower water temperature should be selected.
The length and diameter of the hose also affect the quality of the foam. It is recommended to use a hose no longer than 30 meters and a diameter of at least 12 mm. If the hose is too long or has a small diameter, the water and air pressure may decrease, resulting in poor foam quality.
Restrictions such as drum adapters and spray guns can also affect foam quality. It is recommended to use rubberized full bore valve triggers to ensure maximum water and air flow.
The video https://www.youtube.com/watch?v=TSBGifDlLdA shows how increasing the pressure in the system to 20 bar and increasing the length of the hose to 20 meters increases the pressure of the foam and makes it more effective in cleaning the surface.
High-quality foam is an important element of effective surface cleaning. With the correct selection of parameters, you can obtain high-quality foam that will provide effective and thorough cleaning of the surface.
We ourselves produce most of the items for the system: Pumping stations, foam stations, mobile carts, holders, mounting stands, etc.
We have registered our own trademark and always make sure that the client is satisfied and recommends us to specialists from other enterprises
The OdysseySystems company provides a full range of services in matters of cleanliness in food enterprises: from application processing to facility commissioning and personnel training. Our specialists will install the system in any region of the Russian Federation.
For enterprises that have water treatment systems installed that provide a working pressure of 20 bar, we can provide a test sample of a foam satellite for 30 days for operation at the enterprise.
The advance payment is 50% of the total contract amount. 30% is paid before shipping the goods to the customer. 20% is paid within 10 days after signing the equipment acceptance certificate
The OdysseySystems company provides a full range of services in matters of cleanliness in food enterprises: from application processing to facility commissioning and personnel training. Our specialists will install the system in any region of the Russian Federation.